Subject | Text |
Cool New Circuit Directory | Hello,
I have compiled a cool circuit archive that currently holds around 5500 circuits spread ov |
AV-27820 | Hi there... I'm having some troubles with the vertical sweep on my 32" JVC AV-27820. I think it's th |
|
temperature switch | try using a digital multimeter on dc volts, supply 12 volt supply with series resistor to vary outpu |
SHARPY T.V trobelshoouting | HI friends
I have a problem with my 14'' sharpy colour tv from made in shina.
it was stop |
Re: Polishing of Silicon wafers | [quote:c090204838="Saurav"]Hi,
I have come across a technological development where we are a |
Neufunk TV 34BNA Futura,instruction manual | Hello,
I just repaired a Neufunk tv 34BNA ,which had a white screen and flyback lines across the |
Sanyo CEP2876T-00 East-West | Help! I checked all components around the east-west drive and there is any volt at D651 catod that m |
LG LST-4200A Digital Tv Tuner Rectifier Replacement | Hello,
I don't know very much about electronic repair but from what I can tell my LG LST-4200A AT |
| Plasma's are ment for board level replacement. If it's not working I would start with the power supp |
| I want to have all the parts on hand that are most likely the culprit. I'm trying to gather what I w |
| Tisztelt Zsolt Attlia Ur!
Tehat a lejatszonak nincs semmi baja (ez nagyon jo hir) :), ennek |
| Since it is a voltage multiplier made up of several lower voltage components, you should be able to |
Philips MT6000 Freevents new XP driver ? | I had trouble finding drivers for XP for my PC Philips MT6000 Freevents.
I found these drivers: htt |
| SI-3000 series are 5 legged adjustable regs with xtra control pins.
SI-3090's were typically used |
TDA8174A lowers imput impedance suddenly ? | Hi,
I have a TDA8174A as vertical amplifier. The vertical trigger pulse from the TV processor is in |
| This is a stab.... Replace C023 [email protected] use a 10/16 volt and resolder the regulator STR30130. |
| This is a problem with the hp dv9xxx/6xxx/2xxx series and compaq v6xxx/3xxx series too. There was a |
|
Re: looking for | [quote:6e09f5f793="jts1957"]That's the "Location" and "Rating/Value" of [b:6e09f |
Re: looking for | That's the "Location" and "Rating/Value" of [b:4805c014b2]a part[/b:4805c014b2] |
Gateway M305CRV is dead dead dead | This thing is dewad. Someone gave it to me ion this condition. Power supply checks out OK on volt |
Re: 32PF9965 | [quote:751193c664="Pacovich"]Don't you love the term flyback, minnie? No problems with the name we g |
| Wither more looking i see the 190 volt is missing by power on it com up but only thil a 15 volt and |
| [quote:595bbc12dd="vtech"]Sounds like a device manufactured by ST micro?
Have you tried contacting |
| check it out could be one channel have DC voltage output. if any of the channel got DC output it wil |
| this is for for the 11ak46
SERVICE MODE INSTALL.4725
this is for the 11ak37
SERVICE MODE (MENU TH |
| Hi,
The DC offset is a marginal voltage at the ouput of an electronic stage. In theory, there sho |
| If memory serves, max. voltage for most three-terminal regulators is 35 volts (7805 min. voltage = 7 |
potentiometer / rheostat questions | Hello,
I have some 12 volt DC "rope lights" I am putting in my motor home. I am trying |
| Item #: BP95-00155A Your Price: $96.98 EA
Description: CONVERGENCE MODULE BP95-0014 |
| Hi,
Just a few questions,
1) Start by checking which cicruit is failing.
E.g. Do you have pow |